2010 Dodge Avenger Oil Filter
Find the OEM oil filter part number for the 2010 Dodge Avenger by engine/trim.
Specifications are shared across the 2008–2010 Dodge Avenger. Full details: 2008 Dodge Avenger.
OEM oil filter results
| Engine / Trim | OEM Part Number | Oil Weight | Buy |
|---|---|---|---|
| 2.4L I4 | Not yet verifiedWe had a part number for this engine but could not confirm it, so we have removed it rather than risk sending you the wrong filter. Check your owner's manual or ask a dealer with your VIN. | 5W-20 | |
| 2.7L V6 | Mopar 05281090AB | 5W-20 | |
| 3.5L V6 | Mopar 05281090AB | 10W-30 |
Tip: If your vehicle has multiple engines, match the engine size on your door jamb sticker or owner's manual. Always verify with your owner's manual before purchase.
Service specifications
2.4L I4
- Oil capacity (with filter)
- 4.5 qt (4.4 L)Confirm the final level on the dipstick before driving.
- Change interval (normal)
- Per Oil Change Indicator — max 10,000 mi / 12 mo
- Change interval (severe)
- Indicator shortens the interval automatically; towing and short trips reach it sooner
2.7L V6
- Filter type
- Spin-on
- Oil capacity (with filter)
- 5.5 qt (5.2 L)Confirm the final level on the dipstick before driving.
- Change interval (normal)
- Per Oil Change Indicator — max 10,000 mi / 12 mo
- Change interval (severe)
- Indicator shortens the interval automatically; towing and short trips reach it sooner
3.5L V6
- Filter type
- Spin-on
- Oil capacity (with filter)
- 5.5 qt (5.2 L)Confirm the final level on the dipstick before driving.
- Change interval (normal)
- Per Oil Change Indicator — max 10,000 mi / 12 mo
- Change interval (severe)
- Indicator shortens the interval automatically; towing and short trips reach it sooner
Also fits
Vehicles that also use Mopar 05281090AB:
- Dodge Challenger 2009–2010
- Dodge Charger 2006–2010
- Dodge Dakota 2005–2011
- Dodge Durango 2005–2006
- Dodge Durango 2007–2009
- Dodge Grand Caravan 2005–2007
- Dodge Grand Caravan 2008–2010
- Dodge Journey 2009–2010
- Dodge Magnum 2005–2008
- Dodge Nitro 2007–2011
These vehicles take the same OEM filter part number. Always confirm against your own owner's manual before buying.
Frequently asked questions
What oil filter does a 2010 Dodge Avenger take?
It depends on the engine: the 2.7L V6 uses Mopar 05281090AB; the 3.5L V6 uses Mopar 05281090AB. Match the engine on your door-jamb sticker or owner's manual.
How much oil does a 2010 Dodge Avenger take?
Oil capacity with a new filter — 2.4L I4: 4.5 qt (4.4 L); 2.7L V6: 5.5 qt (5.2 L); 3.5L V6: 5.5 qt (5.2 L). Add slightly less than the stated figure, then confirm the final level on the dipstick before driving.
What oil weight does a 2010 Dodge Avenger use?
Recommended viscosity — 2.4L I4: 5W-20; 2.7L V6: 5W-20; 3.5L V6: 10W-30.
How often should the oil be changed on a 2010 Dodge Avenger?
2.4L I4 — normal service: Per Oil Change Indicator — max 10,000 mi / 12 mo; severe service: Indicator shortens the interval automatically; towing and short trips reach it sooner; 2.7L V6 — normal service: Per Oil Change Indicator — max 10,000 mi / 12 mo; severe service: Indicator shortens the interval automatically; towing and short trips reach it sooner; 3.5L V6 — normal service: Per Oil Change Indicator — max 10,000 mi / 12 mo; severe service: Indicator shortens the interval automatically; towing and short trips reach it sooner. Severe service means short trips, towing, dusty roads or extended idling.
Is the 2010 Dodge Avenger oil filter a cartridge or a spin-on?
2.7L V6: Spin-on; 3.5L V6: Spin-on.
Disclaimer: Amazon links are affiliate links. Verify fitment with your owner's manual.