2011 Dodge Challenger Oil Filter
Find the OEM oil filter part number for the 2011 Dodge Challenger by engine/trim.
The same OEM filter and specifications apply to the 2011–2014 Dodge Challenger.
OEM oil filter results
| Engine / Trim | OEM Part Number | Oil Weight | Buy |
|---|---|---|---|
| 3.6L V6 (Pentastar) | Mopar 68191349AC | 5W-20 | Buy on Amazon |
| 5.7L V8 (HEMI 5.7) | Mopar 04892339AB | 5W-20 | Buy on Amazon |
| 6.4L V8 (SRT 392 6.4) | Mopar 04884899AC | 0W-40 |
Tip: If your vehicle has multiple engines, match the engine size on your door jamb sticker or owner's manual. Always verify with your owner's manual before purchase.
Service specifications
3.6L V6 (Pentastar)
- Filter type
- Cartridge
- Oil capacity (with filter)
- 6 qt (5.6 L)FCA prints this as an approximate quantity and tells you to fill one quart at a time and check the dipstick – overfilling aerates the oil, which its own manual warns can damage the engine.
- Change interval (normal)
- Per Oil Change Indicator — max 10,000 mi / 12 mo
- Change interval (severe)
- Indicator shortens the interval automatically; towing and short trips reach it sooner
5.7L V8 (HEMI 5.7)
- Filter type
- Spin-on
- About this filter
- Mopar supplies two filters for the 5.7 HEMI and both fit — 04892339AB, which is the one Mopar catalogues for this vehicle and the one listed above, and 04884899AC, which is the same thread and fitment in a different length. The shorter one exists for radiator-hose clearance in some bodies. If the filter that came off your car is the other number, that is not a mistake; either will seal and seat.
- Oil capacity (with filter)
- 7 qt (6.6 L)FCA prints this as an approximate quantity and tells you to fill one quart at a time and check the dipstick – overfilling aerates the oil, which its own manual warns can damage the engine.
- Change interval (normal)
- Per Oil Change Indicator — max 10,000 mi / 12 mo
- Change interval (severe)
- Indicator shortens the interval automatically; towing and short trips reach it sooner
6.4L V8 (SRT 392 6.4)
- Filter type
- Spin-on
- Oil specification
- FCA calls for a synthetic 0W-40 meeting its own MS-12633 standard on this engine, not merely any 0W-40 – the approval is printed on the bottle. Mopar and Pennzoil Ultra Platinum Euro 0W-40 are the grades FCA lists against it.
- Oil capacity (with filter)
- 7 qt (6.6 L)FCA prints this as an approximate quantity and tells you to fill one quart at a time and check the dipstick – overfilling aerates the oil, which its own manual warns can damage the engine.
- Change interval (normal)
- Per Oil Change Indicator — max 6,000 mi / 6 mo
- Change interval (severe)
- Indicator shortens the interval automatically; towing and short trips reach it sooner
Also fits
Vehicles that also use Mopar 68191349AC:
- Dodge Avenger 2011–2012
- Dodge Avenger 2013–2014
- Dodge Charger 2011–2012
- Dodge Charger 2013–2023
- Dodge Dart 2013–2016
- Dodge Durango 2011–2012
- Dodge Durango 2013–2015
- Dodge Durango 2016–present
- Dodge Grand Caravan 2011–2012
- Dodge Grand Caravan 2013–2020
Vehicles that also use Mopar 04892339AB:
- Dodge Charger 2006–2010
- Dodge Charger 2011–2023
- Dodge Durango 2005–2009
- Dodge Durango 2011–present
- Dodge Magnum 2005–2008
- Alfa Romeo Giulia 2017–present
- Alfa Romeo Stelvio 2018–present
- Chrysler 300 2005–2010
- Chrysler 300 2011–2023
- Chrysler Aspen 2007–2009
Vehicles that also use Mopar 04884899AC:
- Dodge Charger 2006–2010
- Dodge Charger 2012–2023
- Dodge Charger 2015–2023
- Dodge Durango 2018–present
- Dodge Magnum 2005–2008
- Chrysler 300 2005–2010
- Chrysler 300 2012–2014
- Jeep Commander 2006–2010
- Jeep Grand Cherokee 2005–2010
- Jeep Grand Cherokee 2006–2010
These vehicles take the same OEM filter part number. Always confirm against your own owner's manual before buying.
Frequently asked questions
What oil filter does a 2011 Dodge Challenger take?
It depends on the engine: the 3.6L V6 (Pentastar) uses Mopar 68191349AC; the 5.7L V8 (HEMI 5.7) uses Mopar 04892339AB; the 6.4L V8 (SRT 392 6.4) uses Mopar 04884899AC. Match the engine on your door-jamb sticker or owner's manual.
How much oil does a 2011 Dodge Challenger take?
Oil capacity with a new filter — 3.6L V6 (Pentastar): 6 qt (5.6 L); 5.7L V8 (HEMI 5.7): 7 qt (6.6 L); 6.4L V8 (SRT 392 6.4): 7 qt (6.6 L). Add slightly less than the stated figure, then confirm the final level on the dipstick before driving.
What oil weight does a 2011 Dodge Challenger use?
Recommended viscosity — 3.6L V6 (Pentastar): 5W-20; 5.7L V8 (HEMI 5.7): 5W-20; 6.4L V8 (SRT 392 6.4): 0W-40.
How often should the oil be changed on a 2011 Dodge Challenger?
3.6L V6 (Pentastar) — normal service: Per Oil Change Indicator — max 10,000 mi / 12 mo; severe service: Indicator shortens the interval automatically; towing and short trips reach it sooner; 5.7L V8 (HEMI 5.7) — normal service: Per Oil Change Indicator — max 10,000 mi / 12 mo; severe service: Indicator shortens the interval automatically; towing and short trips reach it sooner; 6.4L V8 (SRT 392 6.4) — normal service: Per Oil Change Indicator — max 6,000 mi / 6 mo; severe service: Indicator shortens the interval automatically; towing and short trips reach it sooner. Severe service means short trips, towing, dusty roads or extended idling.
Is the 2011 Dodge Challenger oil filter a cartridge or a spin-on?
3.6L V6 (Pentastar): Cartridge; 5.7L V8 (HEMI 5.7): Spin-on; 6.4L V8 (SRT 392 6.4): Spin-on.
Disclaimer: Amazon links are affiliate links. Verify fitment with your owner's manual.