2020 Ford Mustang Oil Filter
Find the OEM oil filter part number for the 2020 Ford Mustang by engine/trim.
OEM oil filter results
| Engine / Trim | OEM Part Number | Oil Weight | Buy |
|---|---|---|---|
| 5.2L V8 (Shelby GT350 (5.2)) | Motorcraft FL-2069-ST or Motorcraft FL-2087Adepends on which mount your car has — see below | 5W-50 | — |
| 2.3L I4 Turbo (EcoBoost (2.3)) | Motorcraft FL-910S | 5W-30 | Buy on Amazon |
| 5.0L V8 (GT (5.0, Gen3/Gen4)) | Motorcraft FL-500S | 5W-20 | Buy on Amazon |
| 5.2L V8 Supercharged (Shelby GT500 (5.2 Supercharged)) | Motorcraft FL-2087A | 5W-50 | — |
Tip: If your vehicle has multiple engines, match the engine size on your door jamb sticker or owner's manual. Always verify with your owner's manual before purchase.
Service specifications
5.2L V8 (Shelby GT350 (5.2))
- Filter type
- Cartridge
- Oil capacity (with filter)
- 10.0 qtConfirm the final level on the dipstick before driving.
- Change interval (normal)
- Per Ford Intelligent Oil-Life Monitor — up to 10,000 mi / 12 mo
- Change interval (severe)
- 5,000–7,500 mi towing or high load; 3,000–5,000 mi short trips or extreme temperatures
This engine takes one of two filters
- FL-2069-ST — if your car has the spin-on mount
- FL-2087A — if your car has the cartridge mount
Both are correct for this engine — which one you need depends on the oil filter mount fitted to your car, and they are not interchangeable. A spin-on is a one-piece metal canister that threads straight onto the block. A cartridge is a paper element that sits inside a housing under a removable cap. Look at yours before you buy — it takes about ten seconds.
2.3L I4 Turbo (EcoBoost (2.3))
- Filter type
- Spin-on
- Oil capacity (with filter)
- 6.0 qtConfirm the final level on the dipstick before driving.
- Change interval (normal)
- Per Ford Intelligent Oil-Life Monitor — up to 10,000 mi / 12 mo
- Change interval (severe)
- 5,000–7,500 mi towing or high load; 3,000–5,000 mi short trips or extreme temperatures
5.0L V8 (GT (5.0, Gen3/Gen4))
- Filter type
- Spin-on
- Change interval (normal)
- Per Ford Intelligent Oil-Life Monitor — up to 10,000 mi / 12 mo
- Change interval (severe)
- 5,000–7,500 mi towing or high load; 3,000–5,000 mi short trips or extreme temperatures
5.2L V8 Supercharged (Shelby GT500 (5.2 Supercharged))
- Filter type
- Cartridge
- Oil capacity (with filter)
- 11.5 qtConfirm the final level on the dipstick before driving.
- Change interval (normal)
- Per Ford Intelligent Oil-Life Monitor — up to 10,000 mi / 12 mo
- Change interval (severe)
- 5,000–7,500 mi towing or high load; 3,000–5,000 mi short trips or extreme temperatures
Also fits
Vehicles that also use Motorcraft FL-910S:
- Ford Bronco 2021–2024
- Ford Bronco Sport 2021–present
- Ford C-Max 2013–2018
- Ford EcoSport 2018–2022
- Ford Edge 2015–2018
- Ford Edge 2019–present
- Ford Escape 2005–2007
- Ford Escape 2008–2012
- Ford Escape 2013–2016
- Ford Escape 2017–2019
Vehicles that also use Motorcraft FL-500S:
- Ford Edge 2011–2014
- Ford Edge 2015–2018
- Ford Expedition 2015–present
- Ford Explorer 2011–2015
- Ford Explorer 2016–2019
- Ford Explorer 2020–present
- Ford F-150 2011–2014
- Ford F-150 2015–2017
- Ford F-150 2018–2020
- Ford F-150 2021–present
These vehicles take the same OEM filter part number. Always confirm against your own owner's manual before buying.
Frequently asked questions
What oil filter does a 2020 Ford Mustang take?
It depends on the engine: the 5.2L V8 (Shelby GT350 (5.2)) uses Motorcraft FL-2069-ST or Motorcraft FL-2087A, depending on which oil filter mount your car has — spin-on or cartridge; the 2.3L I4 Turbo (EcoBoost (2.3)) uses Motorcraft FL-910S; the 5.0L V8 (GT (5.0, Gen3/Gen4)) uses Motorcraft FL-500S; the 5.2L V8 Supercharged (Shelby GT500 (5.2 Supercharged)) uses Motorcraft FL-2087A. Match the engine on your door-jamb sticker or owner's manual.
How much oil does a 2020 Ford Mustang take?
Oil capacity with a new filter — 5.2L V8 (Shelby GT350 (5.2)): 10.0 qt; 2.3L I4 Turbo (EcoBoost (2.3)): 6.0 qt; 5.2L V8 Supercharged (Shelby GT500 (5.2 Supercharged)): 11.5 qt. Add slightly less than the stated figure, then confirm the final level on the dipstick before driving.
What oil weight does a 2020 Ford Mustang use?
Recommended viscosity — 5.2L V8 (Shelby GT350 (5.2)): 5W-50; 2.3L I4 Turbo (EcoBoost (2.3)): 5W-30; 5.0L V8 (GT (5.0, Gen3/Gen4)): 5W-20; 5.2L V8 Supercharged (Shelby GT500 (5.2 Supercharged)): 5W-50.
How often should the oil be changed on a 2020 Ford Mustang?
5.2L V8 (Shelby GT350 (5.2)) — normal service: Per Ford Intelligent Oil-Life Monitor — up to 10,000 mi / 12 mo; severe service: 5,000–7,500 mi towing or high load; 3,000–5,000 mi short trips or extreme temperatures; 2.3L I4 Turbo (EcoBoost (2.3)) — normal service: Per Ford Intelligent Oil-Life Monitor — up to 10,000 mi / 12 mo; severe service: 5,000–7,500 mi towing or high load; 3,000–5,000 mi short trips or extreme temperatures; 5.0L V8 (GT (5.0, Gen3/Gen4)) — normal service: Per Ford Intelligent Oil-Life Monitor — up to 10,000 mi / 12 mo; severe service: 5,000–7,500 mi towing or high load; 3,000–5,000 mi short trips or extreme temperatures; 5.2L V8 Supercharged (Shelby GT500 (5.2 Supercharged)) — normal service: Per Ford Intelligent Oil-Life Monitor — up to 10,000 mi / 12 mo; severe service: 5,000–7,500 mi towing or high load; 3,000–5,000 mi short trips or extreme temperatures. Severe service means short trips, towing, dusty roads or extended idling.
Is the 2020 Ford Mustang oil filter a cartridge or a spin-on?
5.2L V8 (Shelby GT350 (5.2)): Cartridge; 2.3L I4 Turbo (EcoBoost (2.3)): Spin-on; 5.0L V8 (GT (5.0, Gen3/Gen4)): Spin-on; 5.2L V8 Supercharged (Shelby GT500 (5.2 Supercharged)): Cartridge.
Disclaimer: Amazon links are affiliate links. Verify fitment with your owner's manual.