2019 Jeep Wrangler Oil Filter

Find the OEM oil filter part number for the 2019 Jeep Wrangler by engine/trim.

Specifications are shared across the 2018–2019 Jeep Wrangler. Full details: 2018 Jeep Wrangler.

OEM oil filter results

Engine / TrimOEM Part NumberOil WeightBuy
2.0L I4 Turbo (JL) Mopar 04892339BE 5W-20 Buy on Amazon
Buy 5W-20 oil: Mobil 1 · Valvoline · Castrol · Pennzoil
3.6L V6 (Sport/Sahara/Rubicon (JL)) Mopar 68191349AC 5W-20 Buy on Amazon
Buy 5W-20 oil: Mobil 1 · Valvoline · Castrol · Pennzoil

Tip: If your vehicle has multiple engines, match the engine size on your door jamb sticker or owner's manual. Always verify with your owner's manual before purchase.

Service specifications

2.0L I4 Turbo (JL)

Filter type
Spin-on
Oil capacity (with filter)
5 qt (4.73 L)FCA prints this as an approximate quantity and tells you to fill one quart at a time and check the dipstick – overfilling aerates the oil, which its own manual warns can damage the engine.
Change interval (normal)
Per Oil Change Indicator — max 10,000 mi / 12 mo
Change interval (severe)
Indicator shortens the interval automatically; towing and short trips reach it sooner

3.6L V6 (Sport/Sahara/Rubicon (JL))

Filter type
Cartridge
Oil capacity (with filter)
5.0 qtThis engine drains back into the sump slowly, so straight after a correct fill the dipstick can read LOW — and adding oil to bring it up will overfill the crankcase. FCA issued a bulletin about exactly this: do not add more than the figure above. Give it time to drain back, then check again.
Change interval (normal)
Per Oil Change Indicator — max 10,000 mi / 12 mo
Change interval (severe)
Indicator shortens the interval automatically; towing and short trips reach it sooner

Also fits

Vehicles that also use Mopar 04892339BE:

Vehicles that also use Mopar 68191349AC:

These vehicles take the same OEM filter part number. Always confirm against your own owner's manual before buying.

Frequently asked questions

What oil filter does a 2019 Jeep Wrangler take?

It depends on the engine: the 2.0L I4 Turbo (JL) uses Mopar 04892339BE; the 3.6L V6 (Sport/Sahara/Rubicon (JL)) uses Mopar 68191349AC. Match the engine on your door-jamb sticker or owner's manual.

How much oil does a 2019 Jeep Wrangler take?

Oil capacity with a new filter — 2.0L I4 Turbo (JL): 5 qt (4.73 L); 3.6L V6 (Sport/Sahara/Rubicon (JL)): 5.0 qt. Add slightly less than the stated figure, then confirm the final level on the dipstick before driving.

What oil weight does a 2019 Jeep Wrangler use?

Recommended viscosity — 2.0L I4 Turbo (JL): 5W-20; 3.6L V6 (Sport/Sahara/Rubicon (JL)): 5W-20.

How often should the oil be changed on a 2019 Jeep Wrangler?

2.0L I4 Turbo (JL) — normal service: Per Oil Change Indicator — max 10,000 mi / 12 mo; severe service: Indicator shortens the interval automatically; towing and short trips reach it sooner; 3.6L V6 (Sport/Sahara/Rubicon (JL)) — normal service: Per Oil Change Indicator — max 10,000 mi / 12 mo; severe service: Indicator shortens the interval automatically; towing and short trips reach it sooner. Severe service means short trips, towing, dusty roads or extended idling.

Is the 2019 Jeep Wrangler oil filter a cartridge or a spin-on?

2.0L I4 Turbo (JL): Spin-on; 3.6L V6 (Sport/Sahara/Rubicon (JL)): Cartridge.

Disclaimer: Amazon links are affiliate links. Verify fitment with your owner's manual.