2006 Toyota 4Runner Oil Filter
Find the OEM oil filter part number for the 2006 Toyota 4Runner by engine/trim.
Specifications are shared across the 2005–2009 Toyota 4Runner. Full details: 2005 Toyota 4Runner.
OEM oil filter results
| Engine / Trim | OEM Part Number | Oil Weight | Buy |
|---|---|---|---|
| 4.0L V6 (1GR-FE) | Toyota 90915-YZZD3 | see owner's manual | Buy on Amazon |
| 4.7L V8 (2UZ-FE) | Toyota 90915-YZZD3 | 5W-30 | Buy on Amazon |
Tip: If your vehicle has multiple engines, match the engine size on your door jamb sticker or owner's manual. Always verify with your owner's manual before purchase.
Service specifications
4.0L V6 (1GR-FE)
- Filter type
- Spin-on
- Oil capacity (with filter)
- 5.5 qt (5.2 L)Toyota prints this as a reference quantity, not a target – warm the engine, switch it off, wait more than five minutes and check the level on the dipstick before topping up.
- Change interval (normal)
- 5,000 mi / 6 mo
- Change interval (severe)
- 5,000 mi / 6 mo
4.7L V8 (2UZ-FE)
- Filter type
- Spin-on
- Oil capacity (with filter)
- 6.5 qt (6.2 L)Toyota prints this as a reference quantity, not a target – warm the engine, switch it off, wait more than five minutes and check the level on the dipstick before topping up.
- Change interval (normal)
- 5,000 mi / 6 mo
- Change interval (severe)
- 5,000 mi / 6 mo
Also fits
Vehicles that also use Toyota 90915-YZZD3:
- Toyota FJ Cruiser 2007–2009
- Toyota Land Cruiser 2005–2007
- Toyota Sequoia 2005–2007
- Toyota Tacoma 2005–2015
- Toyota Tundra 2005–2006
- Toyota Tundra 2007–2010
These vehicles take the same OEM filter part number. Always confirm against your own owner's manual before buying.
Frequently asked questions
What oil filter does a 2006 Toyota 4Runner take?
It depends on the engine: the 4.0L V6 (1GR-FE) uses Toyota 90915-YZZD3; the 4.7L V8 (2UZ-FE) uses Toyota 90915-YZZD3. Match the engine on your door-jamb sticker or owner's manual.
How much oil does a 2006 Toyota 4Runner take?
Oil capacity with a new filter — 4.0L V6 (1GR-FE): 5.5 qt (5.2 L); 4.7L V8 (2UZ-FE): 6.5 qt (6.2 L). Add slightly less than the stated figure, then confirm the final level on the dipstick before driving.
What oil weight does a 2006 Toyota 4Runner use?
Recommended viscosity — 4.7L V8 (2UZ-FE): 5W-30.
How often should the oil be changed on a 2006 Toyota 4Runner?
4.0L V6 (1GR-FE) — normal service: 5,000 mi / 6 mo; severe service: 5,000 mi / 6 mo; 4.7L V8 (2UZ-FE) — normal service: 5,000 mi / 6 mo; severe service: 5,000 mi / 6 mo. Severe service means short trips, towing, dusty roads or extended idling.
Is the 2006 Toyota 4Runner oil filter a cartridge or a spin-on?
4.0L V6 (1GR-FE): Spin-on; 4.7L V8 (2UZ-FE): Spin-on.
Disclaimer: Amazon links are affiliate links. Verify fitment with your owner's manual.