2010 Toyota Camry Oil Filter

Find the OEM oil filter part number for the 2010 Toyota Camry by engine/trim.

OEM oil filter results

Engine / TrimOEM Part NumberOil WeightBuy
3.5L V6 (2GR-FE) Toyota 04152-YZZA1 5W-30 Buy on Amazon
Buy 5W-30 oil: Mobil 1 · Valvoline · Castrol · Pennzoil
2.5L I4 (2AR-FE) Toyota 04152-YZZA1 see owner's manual Buy on Amazon
2.4L I4 Hybrid (Hybrid (2AZ-FXE)) Toyota 90915-YZZF1 5W-20
Buy 5W-20 oil: Mobil 1 · Valvoline · Castrol · Pennzoil

Tip: If your vehicle has multiple engines, match the engine size on your door jamb sticker or owner's manual. Always verify with your owner's manual before purchase.

Service specifications

3.5L V6 (2GR-FE)

Filter type
Cartridge
Oil capacity (with filter)
6.4 qtConfirm the final level on the dipstick before driving.
Change interval (normal)
5,000 mi / 6 mo
Change interval (severe)
5,000 mi / 6 mo
Drain plug torque
30 ft-lb (40 Nm)
Filter housing torque
18 ft-lb (25 Nm)

Aftermarket equivalents — these are commonly cross-referenced to the OEM part above, not OEM parts themselves. Confirm fitment for your exact vehicle before buying.

  • FramCH9972
  • Wix57047
  • PurolatorL25608

2.5L I4 (2AR-FE)

Filter type
Cartridge
Oil capacity (with filter)
4.6 qtConfirm the final level on the dipstick before driving.
Change interval (normal)
5,000 mi / 6 mo
Change interval (severe)
5,000 mi / 6 mo
Drain plug torque
30 ft-lb (40 Nm)
Filter housing torque
18 ft-lb (25 Nm)

Aftermarket equivalents — these are commonly cross-referenced to the OEM part above, not OEM parts themselves. Confirm fitment for your exact vehicle before buying.

  • FramCH9972
  • Wix57047
  • PurolatorL25608

2.4L I4 Hybrid (Hybrid (2AZ-FXE))

Filter type
Spin-on
Oil capacity (with filter)
4.5 qtConfirm the final level on the dipstick before driving.
Change interval (normal)
5,000 mi / 6 mo
Change interval (severe)
5,000 mi / 6 mo

Also fits

Vehicles that also use Toyota 04152-YZZA1:

Vehicles that also use Toyota 90915-YZZF1:

These vehicles take the same OEM filter part number. Always confirm against your own owner's manual before buying.

Frequently asked questions

What oil filter does a 2010 Toyota Camry take?

It depends on the engine: the 3.5L V6 (2GR-FE) uses Toyota 04152-YZZA1; the 2.5L I4 (2AR-FE) uses Toyota 04152-YZZA1; the 2.4L I4 Hybrid (Hybrid (2AZ-FXE)) uses Toyota 90915-YZZF1. Match the engine on your door-jamb sticker or owner's manual.

How much oil does a 2010 Toyota Camry take?

Oil capacity with a new filter — 3.5L V6 (2GR-FE): 6.4 qt; 2.5L I4 (2AR-FE): 4.6 qt; 2.4L I4 Hybrid (Hybrid (2AZ-FXE)): 4.5 qt. Add slightly less than the stated figure, then confirm the final level on the dipstick before driving.

What oil weight does a 2010 Toyota Camry use?

Recommended viscosity — 3.5L V6 (2GR-FE): 5W-30; 2.4L I4 Hybrid (Hybrid (2AZ-FXE)): 5W-20.

How often should the oil be changed on a 2010 Toyota Camry?

3.5L V6 (2GR-FE) — normal service: 5,000 mi / 6 mo; severe service: 5,000 mi / 6 mo; 2.5L I4 (2AR-FE) — normal service: 5,000 mi / 6 mo; severe service: 5,000 mi / 6 mo; 2.4L I4 Hybrid (Hybrid (2AZ-FXE)) — normal service: 5,000 mi / 6 mo; severe service: 5,000 mi / 6 mo. Severe service means short trips, towing, dusty roads or extended idling.

Is the 2010 Toyota Camry oil filter a cartridge or a spin-on?

3.5L V6 (2GR-FE): Cartridge; 2.5L I4 (2AR-FE): Cartridge; 2.4L I4 Hybrid (Hybrid (2AZ-FXE)): Spin-on.

What aftermarket oil filters fit a 2010 Toyota Camry?

Commonly cross-referenced equivalents — 3.5L V6 (2GR-FE): Fram CH9972, Wix 57047, Purolator L25608; 2.5L I4 (2AR-FE): Fram CH9972, Wix 57047, Purolator L25608. These are aftermarket parts cross-referenced to the OEM filter, not OEM parts; confirm fitment for your exact vehicle before buying.

Disclaimer: Amazon links are affiliate links. Verify fitment with your owner's manual.