2026 Toyota Sequoia Oil Filter
Find the OEM oil filter part number for the 2026 Toyota Sequoia by engine/trim.
Specifications are shared across the 2023–2026 Toyota Sequoia. Full details: 2023 Toyota Sequoia.
OEM oil filter results
| Engine / Trim | OEM Part Number | Oil Weight | Buy |
|---|---|---|---|
| 3.4L V6 Hybrid (Hybrid (V35A-FTS)) | Toyota 90915-YZZN3 | 0W-20 | Buy on Amazon |
Tip: If your vehicle has multiple engines, match the engine size on your door jamb sticker or owner's manual. Always verify with your owner's manual before purchase.
Service specifications
3.4L V6 Hybrid (Hybrid (V35A-FTS))
- Filter type
- Spin-on
- Oil capacity (with filter)
- 7.7 qt (7.3 L)Toyota prints this as a reference quantity, not a target – warm the engine, switch it off, wait more than eight minutes and check the level on the dipstick before topping up.
- Change interval (normal)
- 10,000 mi / 12 mo
- Change interval (severe)
- 5,000 mi / 6 mo
Also fits
Vehicles that also use Toyota 90915-YZZN3:
These vehicles take the same OEM filter part number. Always confirm against your own owner's manual before buying.
Frequently asked questions
What oil filter does a 2026 Toyota Sequoia take?
The OEM oil filter for the 2026 Toyota Sequoia is Toyota 90915-YZZN3.
How much oil does a 2026 Toyota Sequoia take?
Oil capacity with a new filter — 3.4L V6 Hybrid (Hybrid (V35A-FTS)): 7.7 qt (7.3 L). Add slightly less than the stated figure, then confirm the final level on the dipstick before driving.
What oil weight does a 2026 Toyota Sequoia use?
Recommended viscosity — 3.4L V6 Hybrid (Hybrid (V35A-FTS)): 0W-20.
How often should the oil be changed on a 2026 Toyota Sequoia?
3.4L V6 Hybrid (Hybrid (V35A-FTS)) — normal service: 10,000 mi / 12 mo; severe service: 5,000 mi / 6 mo. Severe service means short trips, towing, dusty roads or extended idling.
Is the 2026 Toyota Sequoia oil filter a cartridge or a spin-on?
3.4L V6 Hybrid (Hybrid (V35A-FTS)): Spin-on.
Disclaimer: Amazon links are affiliate links. Verify fitment with your owner's manual.