2017 Chrysler Pacifica Oil Filter
Find the OEM oil filter part number for the 2017 Chrysler Pacifica by engine/trim.
The same OEM filter and specifications apply to the 2017–2026 Chrysler Pacifica.
OEM oil filter results
| Engine / Trim | OEM Part Number | Oil Weight | Buy |
|---|---|---|---|
| 3.6L V6 (Pentastar) | Mopar 68191349AC | 5W-20 | Buy on Amazon |
| 3.6L V6 Plug-in Hybrid (Pentastar Hybrid) | Mopar 68191349AC | 0W-20 | Buy on Amazon |
Tip: If your vehicle has multiple engines, match the engine size on your door jamb sticker or owner's manual. Always verify with your owner's manual before purchase.
Service specifications
3.6L V6 (Pentastar)
- Filter type
- Cartridge
- Oil capacity (with filter)
- 5.0 qtThis engine drains back into the sump slowly, so straight after a correct fill the dipstick can read LOW — and adding oil to bring it up will overfill the crankcase. FCA issued a bulletin about exactly this: do not add more than the figure above. Give it time to drain back, then check again.
- Change interval (normal)
- Per Oil Change Indicator — max 10,000 mi / 12 mo
- Change interval (severe)
- Indicator shortens the interval automatically; towing and short trips reach it sooner
3.6L V6 Plug-in Hybrid (Pentastar Hybrid)
- Filter type
- Cartridge
- Oil capacity (with filter)
- 5 qt (4.7 L)FCA prints this as an approximate quantity and tells you to fill one quart at a time and check the dipstick – overfilling aerates the oil, which its own manual warns can damage the engine.
- Change interval (normal)
- Per Oil Change Indicator — max 10,000 mi / 12 mo
- Change interval (severe)
- Indicator shortens the interval automatically; towing and short trips reach it sooner
Also fits
Vehicles that also use Mopar 68191349AC:
- Chrysler 200 2011–2014
- Chrysler 200 2015–2017
- Chrysler 300 2011–2012
- Chrysler 300 2013–2023
- Chrysler Town & Country 2011–2016
- Dodge Avenger 2011–2012
- Dodge Avenger 2013–2014
- Dodge Challenger 2011–2023
- Dodge Charger 2011–2012
- Dodge Charger 2013–2023
These vehicles take the same OEM filter part number. Always confirm against your own owner's manual before buying.
Frequently asked questions
What oil filter does a 2017 Chrysler Pacifica take?
It depends on the engine: the 3.6L V6 (Pentastar) uses Mopar 68191349AC; the 3.6L V6 Plug-in Hybrid (Pentastar Hybrid) uses Mopar 68191349AC. Match the engine on your door-jamb sticker or owner's manual.
How much oil does a 2017 Chrysler Pacifica take?
Oil capacity with a new filter — 3.6L V6 (Pentastar): 5.0 qt; 3.6L V6 Plug-in Hybrid (Pentastar Hybrid): 5 qt (4.7 L). Add slightly less than the stated figure, then confirm the final level on the dipstick before driving.
What oil weight does a 2017 Chrysler Pacifica use?
Recommended viscosity — 3.6L V6 (Pentastar): 5W-20; 3.6L V6 Plug-in Hybrid (Pentastar Hybrid): 0W-20.
How often should the oil be changed on a 2017 Chrysler Pacifica?
3.6L V6 (Pentastar) — normal service: Per Oil Change Indicator — max 10,000 mi / 12 mo; severe service: Indicator shortens the interval automatically; towing and short trips reach it sooner; 3.6L V6 Plug-in Hybrid (Pentastar Hybrid) — normal service: Per Oil Change Indicator — max 10,000 mi / 12 mo; severe service: Indicator shortens the interval automatically; towing and short trips reach it sooner. Severe service means short trips, towing, dusty roads or extended idling.
Is the 2017 Chrysler Pacifica oil filter a cartridge or a spin-on?
3.6L V6 (Pentastar): Cartridge; 3.6L V6 Plug-in Hybrid (Pentastar Hybrid): Cartridge.
Disclaimer: Amazon links are affiliate links. Verify fitment with your owner's manual.