2010 Toyota Corolla Oil Filter
Find the OEM oil filter part number for the 2010 Toyota Corolla by engine/trim.
Specifications are shared across the 2009–2010 Toyota Corolla. Full details: 2009 Toyota Corolla.
OEM oil filter results
| Engine / Trim | OEM Part Number | Oil Weight | Buy |
|---|---|---|---|
| 2.4L I4 (XRS) | Toyota 90915-YZZF1 | 5W-20 | Buy on Amazon |
| 1.8L I4 (2ZR-FE) | Toyota 04152-YZZA6 | 0W-20 | Buy on Amazon |
Tip: If your vehicle has multiple engines, match the engine size on your door jamb sticker or owner's manual. Always verify with your owner's manual before purchase.
Service specifications
2.4L I4 (XRS)
- Filter type
- Spin-on
- Change interval (normal)
- 5,000 mi / 6 mo
- Change interval (severe)
- 5,000 mi / 6 mo
1.8L I4 (2ZR-FE)
- Filter type
- Cartridge
- Oil capacity (with filter)
- 4.4 qtConfirm the final level on the dipstick before driving.
- Change interval (normal)
- 5,000 mi / 6 mo
- Change interval (severe)
- 5,000 mi / 6 mo
Aftermarket equivalents — these are commonly cross-referenced to the OEM part above, not OEM parts themselves. Confirm fitment for your exact vehicle before buying.
- FramCH10358
- Wix57064
- PurolatorL16311
Also fits
Vehicles that also use Toyota 90915-YZZF1:
- Toyota Camry 2007–2009
- Toyota Camry 2010–2011
- Toyota Highlander 2005–2007
- Toyota RAV4 2005
- Toyota RAV4 2006–2008
- Scion xB 2008–2015
Vehicles that also use Toyota 04152-YZZA6:
- Toyota Prius 2010–2022
- Toyota Prius Prime 2017–2022
- Toyota Prius v 2012–2017
- Pontiac Vibe 2009–2010
- Scion iM 2016
- Scion xD 2008–2009
- Scion xD 2010–2014
These vehicles take the same OEM filter part number. Always confirm against your own owner's manual before buying.
Frequently asked questions
What oil filter does a 2010 Toyota Corolla take?
It depends on the engine: the 2.4L I4 (XRS) uses Toyota 90915-YZZF1; the 1.8L I4 (2ZR-FE) uses Toyota 04152-YZZA6. Match the engine on your door-jamb sticker or owner's manual.
How much oil does a 2010 Toyota Corolla take?
Oil capacity with a new filter — 1.8L I4 (2ZR-FE): 4.4 qt. Add slightly less than the stated figure, then confirm the final level on the dipstick before driving.
What oil weight does a 2010 Toyota Corolla use?
Recommended viscosity — 2.4L I4 (XRS): 5W-20; 1.8L I4 (2ZR-FE): 0W-20.
How often should the oil be changed on a 2010 Toyota Corolla?
2.4L I4 (XRS) — normal service: 5,000 mi / 6 mo; severe service: 5,000 mi / 6 mo; 1.8L I4 (2ZR-FE) — normal service: 5,000 mi / 6 mo; severe service: 5,000 mi / 6 mo. Severe service means short trips, towing, dusty roads or extended idling.
Is the 2010 Toyota Corolla oil filter a cartridge or a spin-on?
2.4L I4 (XRS): Spin-on; 1.8L I4 (2ZR-FE): Cartridge.
What aftermarket oil filters fit a 2010 Toyota Corolla?
Commonly cross-referenced equivalents — 1.8L I4 (2ZR-FE): Fram CH10358, Wix 57064, Purolator L16311. These are aftermarket parts cross-referenced to the OEM filter, not OEM parts; confirm fitment for your exact vehicle before buying.
Disclaimer: Amazon links are affiliate links. Verify fitment with your owner's manual.