2012 Toyota RAV4 Oil Filter
Find the OEM oil filter part number for the 2012 Toyota RAV4 by engine/trim.
Specifications are shared across the 2011–2012 Toyota RAV4. Full details: 2011 Toyota RAV4.
OEM oil filter results
| Engine / Trim | OEM Part Number | Oil Weight | Buy |
|---|---|---|---|
| 2.5L I4 (2AR-FE) | Toyota 04152-YZZA1 | see owner's manual | Buy on Amazon |
| 3.5L V6 (2GR-FE) | Toyota 04152-YZZA1 | see owner's manual | Buy on Amazon |
Tip: If your vehicle has multiple engines, match the engine size on your door jamb sticker or owner's manual. Always verify with your owner's manual before purchase.
Service specifications
2.5L I4 (2AR-FE)
- Filter type
- Cartridge
- Oil capacity (with filter)
- 4.6 qtConfirm the final level on the dipstick before driving.
- Change interval (normal)
- 5,000 mi / 6 mo
- Change interval (severe)
- 5,000 mi / 6 mo
- Drain plug torque
- 30 ft-lb (40 Nm)
- Filter housing torque
- 18 ft-lb (25 Nm)
Aftermarket equivalents — these are commonly cross-referenced to the OEM part above, not OEM parts themselves. Confirm fitment for your exact vehicle before buying.
- FramCH9972
- Wix57047
- PurolatorL25608
3.5L V6 (2GR-FE)
- Filter type
- Cartridge
- Oil capacity (with filter)
- 6.4 qtConfirm the final level on the dipstick before driving.
- Drain plug torque
- 30 ft-lb (40 Nm)
- Filter housing torque
- 18 ft-lb (25 Nm)
Aftermarket equivalents — these are commonly cross-referenced to the OEM part above, not OEM parts themselves. Confirm fitment for your exact vehicle before buying.
- FramCH9972
- Wix57047
- PurolatorL25608
Also fits
Vehicles that also use Toyota 04152-YZZA1:
- Toyota Avalon 2005–2010
- Toyota Avalon 2011–2012
- Toyota Avalon 2013–2018
- Toyota Avalon 2019–2022
- Toyota Camry 2007–2009
- Toyota Camry 2010
- Toyota Camry 2010–2011
- Toyota Camry 2011
- Toyota Camry 2012–2017
- Toyota Camry 2018–present
These vehicles take the same OEM filter part number. Always confirm against your own owner's manual before buying.
Frequently asked questions
What oil filter does a 2012 Toyota RAV4 take?
It depends on the engine: the 2.5L I4 (2AR-FE) uses Toyota 04152-YZZA1; the 3.5L V6 (2GR-FE) uses Toyota 04152-YZZA1. Match the engine on your door-jamb sticker or owner's manual.
How much oil does a 2012 Toyota RAV4 take?
Oil capacity with a new filter — 2.5L I4 (2AR-FE): 4.6 qt; 3.5L V6 (2GR-FE): 6.4 qt. Add slightly less than the stated figure, then confirm the final level on the dipstick before driving.
How often should the oil be changed on a 2012 Toyota RAV4?
2.5L I4 (2AR-FE) — normal service: 5,000 mi / 6 mo; severe service: 5,000 mi / 6 mo. Severe service means short trips, towing, dusty roads or extended idling.
Is the 2012 Toyota RAV4 oil filter a cartridge or a spin-on?
2.5L I4 (2AR-FE): Cartridge; 3.5L V6 (2GR-FE): Cartridge.
What aftermarket oil filters fit a 2012 Toyota RAV4?
Commonly cross-referenced equivalents — 2.5L I4 (2AR-FE): Fram CH9972, Wix 57047, Purolator L25608; 3.5L V6 (2GR-FE): Fram CH9972, Wix 57047, Purolator L25608. These are aftermarket parts cross-referenced to the OEM filter, not OEM parts; confirm fitment for your exact vehicle before buying.
Disclaimer: Amazon links are affiliate links. Verify fitment with your owner's manual.