2018 Toyota Tacoma Oil Filter
Find the OEM oil filter part number for the 2018 Toyota Tacoma by engine/trim.
Specifications are shared across the 2016–2023 Toyota Tacoma. Full details: 2016 Toyota Tacoma.
OEM oil filter results
| Engine / Trim | OEM Part Number | Oil Weight | Buy |
|---|---|---|---|
| 2.7L I4 (2TR-FE) | Toyota 90915-YZZD1 | 0W-20 | |
| 3.5L V6 (2GR-FKS) | Toyota 04152-YZZA1 | see owner's manual | Buy on Amazon |
Tip: If your vehicle has multiple engines, match the engine size on your door jamb sticker or owner's manual. Always verify with your owner's manual before purchase.
Service specifications
2.7L I4 (2TR-FE)
- Filter type
- Spin-on
- Oil capacity (with filter)
- 6.2 qt (5.9 L)Toyota prints this as a reference quantity, not a target – warm the engine, switch it off, wait more than five minutes and check the level on the dipstick before topping up.
- Change interval (normal)
- 10,000 mi / 12 mo
- Change interval (severe)
- 5,000 mi / 6 mo
3.5L V6 (2GR-FKS)
- Filter type
- Cartridge
- Oil capacity (with filter)
- 6.2 qt (5.9 L)Toyota prints this as a reference quantity, not a target – warm the engine, switch it off, wait more than five minutes and check the level on the dipstick before topping up.
- Change interval (normal)
- 10,000 mi / 12 mo
- Change interval (severe)
- 5,000 mi / 6 mo
Aftermarket equivalents — these are commonly cross-referenced to the OEM part above, not OEM parts themselves. Confirm fitment for your exact vehicle before buying.
- FramCH9972
- Wix57047
- PurolatorL25608
Also fits
Vehicles that also use Toyota 04152-YZZA1:
- Toyota Avalon 2005–2010
- Toyota Avalon 2011–2012
- Toyota Avalon 2013–2018
- Toyota Avalon 2019–2022
- Toyota Camry 2007–2009
- Toyota Camry 2010
- Toyota Camry 2010–2011
- Toyota Camry 2011
- Toyota Camry 2012–2017
- Toyota Camry 2018–present
These vehicles take the same OEM filter part number. Always confirm against your own owner's manual before buying.
Frequently asked questions
What oil filter does a 2018 Toyota Tacoma take?
It depends on the engine: the 2.7L I4 (2TR-FE) uses Toyota 90915-YZZD1; the 3.5L V6 (2GR-FKS) uses Toyota 04152-YZZA1. Match the engine on your door-jamb sticker or owner's manual.
How much oil does a 2018 Toyota Tacoma take?
Oil capacity with a new filter — 2.7L I4 (2TR-FE): 6.2 qt (5.9 L); 3.5L V6 (2GR-FKS): 6.2 qt (5.9 L). Add slightly less than the stated figure, then confirm the final level on the dipstick before driving.
What oil weight does a 2018 Toyota Tacoma use?
Recommended viscosity — 2.7L I4 (2TR-FE): 0W-20.
How often should the oil be changed on a 2018 Toyota Tacoma?
2.7L I4 (2TR-FE) — normal service: 10,000 mi / 12 mo; severe service: 5,000 mi / 6 mo; 3.5L V6 (2GR-FKS) — normal service: 10,000 mi / 12 mo; severe service: 5,000 mi / 6 mo. Severe service means short trips, towing, dusty roads or extended idling.
Is the 2018 Toyota Tacoma oil filter a cartridge or a spin-on?
2.7L I4 (2TR-FE): Spin-on; 3.5L V6 (2GR-FKS): Cartridge.
What aftermarket oil filters fit a 2018 Toyota Tacoma?
Commonly cross-referenced equivalents — 3.5L V6 (2GR-FKS): Fram CH9972, Wix 57047, Purolator L25608. These are aftermarket parts cross-referenced to the OEM filter, not OEM parts; confirm fitment for your exact vehicle before buying.
Disclaimer: Amazon links are affiliate links. Verify fitment with your owner's manual.